This is a value pack for all 3 wine caddy templates that I offer. Save 20% by buying all three at once.
These are 0.5 inch Cast Acrylic Master Templates for one bottle, 2 glass wine caddies.
1/4” flush trim bit Required for proper use.
One measures 12" long at its longest point, and 4" wide at its widest point and the other two measure 10” at their longest points and 3.75” wide at their widest. All pair perfectly with my coaster Size Epoxy Resin Form.
These templates is designed to be used in conjunction with a flush trim bit and guide bearing on a router table. They can be also be used to trace the shape to be cut on a scroll saw or jigsaw OR with a flush trim bit in a handheld router with a little more preparation.
These templates can be attached to a “blank” workpiece using double sided tape and repositioned until you achieve the look you are hoping to create. Whether it be a laminated board blank, a wood and resin board blank, or simply a piece of hardwood.
These templates are intended to get you an accurate and repeatable shape quickly and easily every time. They are not intended to produce a finished product. Your general edge shaping (chamfers and round overs) as well as sanding will still be required to achieve a finished work piece.