The Jess Crow - Black HDPE Reusable Epoxy Circle Form.
This form is the first of our CIRCLE series!!! We have designed this form to incorporate magnet hold down in consecutive rind diameters. A phenomenal blend of Art & Function that is so classic - Jess Crow
We have combined the same non-stick HDPE materials as our original reusable resin form with the versatility of rare earth magnets to create a unique All-In-One mult-ring platform resin mold.
This Jess Crow - Signature Series Reusable Black HDPE Epoxy Circle Form measures:
24" Square Platform Base W/ the following Ring Sizes:
All measurements are INTERIOR dimensions.
Disclaimer:
This form is intended to save you the hassle of completely rebuilding, taping, and finding clever ways to clamp your work in place. These forms will produce a blank, not a finished product. This form is intended to make setting up and resetting for your next pour as quick and efficient as possible to maximize work flow. It is not intended to produce a final piece that is ready to sell.
Due to the slick nature of the HDPE, there will be minor manufacturing “scuff” marks on the surface of the form. These marks will transfer to your resin but will be planed and/or sanded away very easily when working the blank to final thickness. These scuffs will in NO way affect your final piece.
The magnets will provide excellent hold down strength to each of the rings however they will require a sealing bead of silicone under each ring to create a leak tight seal.
Purchase Bonuses:
10% off your first purchase of Total Boat - & Jess Crow MakerPoxy
20% off your first purchase of Black Diamond Mica Pigments
About This Product:
This is the last style resin form you’ll ever need. It is constructed of 3/4 inch thick High Density Polyethylene (HDPE) - Black in color. A durable plastic that when properly maintained, e.g. coupled with the use of a high grade releasing agent such as Honeywax or Stoner, will make for many fun and productive hours of pouring in the shop!
The form will be fully assembled out of the box, minus the hold down bars. It will need a coat of mold release before use to ensure a long and healthy life for your form. Subsequent use of the mold release should be performed per manufacturers recommendation of your chosen releasing agent. The TWO long sides of the form will be “permanently” secured and sealed with RTV silicone gasket maker with bolts and threaded inserts. (These sides can be removed if you ever need them to be, but it isn’t necessary to remove them for normal function.)
Removing the Blank from the Form:
With this design, each ring can be poured individually to create separate or combined circle or ring patterns. it is only necessary to remove the far outside ring with the pry removal tool to separate the blank from the platform base. The blank can be pushed through the separated ring to reveal the raw unfinished blank.
Resetting the Form for the Next Pour:
Simply clean the residue from the ring surface, re-apply a bead of seal chalking and reset in place with the magnets. Mold release can be used to aid in the blank release as well as extend the life of the form platform & rings. It is THAT easy!